
DS3105
123
15. Data Sheet Revision History
REVISION
DATE
DESCRIPTION
120707
Initial data sheet release.
100108
In Section
7.7.12, corrected the PLL bandwidth range to have the correct range of 18kHz to 400Hz to match
the register descriptions for T0ABW and T0LBW.
030909
In
Table 6-1, in the IC5POS/NEG and IC6POS/NEG pin descriptions, added text to say that if the pins are not
used they should be left unconnected.
5/09
added note indicating systems must be able to access entire address range 0-1FFh.
8/10
In
Figure 9-1 corrected pullup resistors values to 50k
.
In
PHMON.NW bit description, added "(TEST1.D180=0)".
Edited MCR10.SRFPIN decription to say this also.
In Section
7.7.6 deleted sentence that said the hard and soft limits have hysteresis.
Replaced the term "floating" with "unconnected" in several places.
Updated soldering temperature information in Section
10.2012-04
Reformatted for Microsemi. No content change.